1 /*
2 * Copyright (c) 1997, 2025, Oracle and/or its affiliates. All rights reserved.
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 *
5 * This code is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 only, as
7 * published by the Free Software Foundation.
8 *
9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * version 2 for more details (a copy is included in the LICENSE file that
13 * accompanied this code).
14 *
15 * You should have received a copy of the GNU General Public License version
16 * 2 along with this work; if not, write to the Free Software Foundation,
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 *
19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
20 * or visit www.oracle.com if you need additional information or have any
21 * questions.
22 *
23 */
24
25 #include "compiler/compiler_globals.hpp"
26 #include "interp_masm_x86.hpp"
27 #include "interpreter/interpreter.hpp"
28 #include "interpreter/interpreterRuntime.hpp"
29 #include "logging/log.hpp"
30 #include "oops/arrayOop.hpp"
31 #include "oops/markWord.hpp"
32 #include "oops/methodData.hpp"
33 #include "oops/method.hpp"
34 #include "oops/resolvedFieldEntry.hpp"
35 #include "oops/resolvedIndyEntry.hpp"
36 #include "oops/resolvedMethodEntry.hpp"
37 #include "prims/jvmtiExport.hpp"
38 #include "prims/jvmtiThreadState.hpp"
39 #include "runtime/basicLock.hpp"
40 #include "runtime/frame.inline.hpp"
41 #include "runtime/javaThread.hpp"
42 #include "runtime/safepointMechanism.hpp"
43 #include "runtime/sharedRuntime.hpp"
44 #include "utilities/powerOfTwo.hpp"
45
46 // Implementation of InterpreterMacroAssembler
47
48 void InterpreterMacroAssembler::jump_to_entry(address entry) {
49 assert(entry, "Entry must have been generated by now");
50 jump(RuntimeAddress(entry));
51 }
52
53 void InterpreterMacroAssembler::profile_obj_type(Register obj, const Address& mdo_addr) {
54 Label update, next, none;
55
56 assert_different_registers(obj, rscratch1, mdo_addr.base(), mdo_addr.index());
57
58 interp_verify_oop(obj, atos);
59
60 testptr(obj, obj);
61 jccb(Assembler::notZero, update);
62 testptr(mdo_addr, TypeEntries::null_seen);
63 jccb(Assembler::notZero, next); // null already seen. Nothing to do anymore.
64 // atomic update to prevent overwriting Klass* with 0
65 lock();
66 orptr(mdo_addr, TypeEntries::null_seen);
67 jmpb(next);
68
69 bind(update);
70 load_klass(obj, obj, rscratch1);
71 mov(rscratch1, obj);
72
73 xorptr(obj, mdo_addr);
74 testptr(obj, TypeEntries::type_klass_mask);
75 jccb(Assembler::zero, next); // klass seen before, nothing to
76 // do. The unknown bit may have been
77 // set already but no need to check.
78
79 testptr(obj, TypeEntries::type_unknown);
80 jccb(Assembler::notZero, next); // already unknown. Nothing to do anymore.
81
82 cmpptr(mdo_addr, 0);
83 jccb(Assembler::equal, none);
84 cmpptr(mdo_addr, TypeEntries::null_seen);
85 jccb(Assembler::equal, none);
86
87 // There is a chance that the checks above (re-reading profiling
88 // data from memory) fail if another thread has just set the
89 // profiling to this obj's klass
90 mov(obj, rscratch1);
91 xorptr(obj, mdo_addr);
92 testptr(obj, TypeEntries::type_klass_mask);
93 jccb(Assembler::zero, next);
94
95 // different than before. Cannot keep accurate profile.
96 orptr(mdo_addr, TypeEntries::type_unknown);
97 jmpb(next);
98
99 bind(none);
100 // first time here. Set profile type.
101 movptr(mdo_addr, obj);
102 #ifdef ASSERT
103 andptr(obj, TypeEntries::type_klass_mask);
104 verify_klass_ptr(obj);
105 #endif
106
107 bind(next);
108 }
109
110 void InterpreterMacroAssembler::profile_arguments_type(Register mdp, Register callee, Register tmp, bool is_virtual) {
111 if (!ProfileInterpreter) {
112 return;
113 }
114
115 if (MethodData::profile_arguments() || MethodData::profile_return()) {
116 Label profile_continue;
117
118 test_method_data_pointer(mdp, profile_continue);
119
120 int off_to_start = is_virtual ? in_bytes(VirtualCallData::virtual_call_data_size()) : in_bytes(CounterData::counter_data_size());
121
122 cmpb(Address(mdp, in_bytes(DataLayout::tag_offset()) - off_to_start), is_virtual ? DataLayout::virtual_call_type_data_tag : DataLayout::call_type_data_tag);
123 jcc(Assembler::notEqual, profile_continue);
124
125 if (MethodData::profile_arguments()) {
126 Label done;
127 int off_to_args = in_bytes(TypeEntriesAtCall::args_data_offset());
128 addptr(mdp, off_to_args);
129
130 for (int i = 0; i < TypeProfileArgsLimit; i++) {
131 if (i > 0 || MethodData::profile_return()) {
132 // If return value type is profiled we may have no argument to profile
133 movptr(tmp, Address(mdp, in_bytes(TypeEntriesAtCall::cell_count_offset())-off_to_args));
134 subl(tmp, i*TypeStackSlotEntries::per_arg_count());
135 cmpl(tmp, TypeStackSlotEntries::per_arg_count());
136 jcc(Assembler::less, done);
137 }
138 movptr(tmp, Address(callee, Method::const_offset()));
139 load_unsigned_short(tmp, Address(tmp, ConstMethod::size_of_parameters_offset()));
140 // stack offset o (zero based) from the start of the argument
141 // list, for n arguments translates into offset n - o - 1 from
142 // the end of the argument list
143 subptr(tmp, Address(mdp, in_bytes(TypeEntriesAtCall::stack_slot_offset(i))-off_to_args));
144 subl(tmp, 1);
145 Address arg_addr = argument_address(tmp);
146 movptr(tmp, arg_addr);
147
148 Address mdo_arg_addr(mdp, in_bytes(TypeEntriesAtCall::argument_type_offset(i))-off_to_args);
149 profile_obj_type(tmp, mdo_arg_addr);
150
151 int to_add = in_bytes(TypeStackSlotEntries::per_arg_size());
152 addptr(mdp, to_add);
153 off_to_args += to_add;
154 }
155
156 if (MethodData::profile_return()) {
157 movptr(tmp, Address(mdp, in_bytes(TypeEntriesAtCall::cell_count_offset())-off_to_args));
158 subl(tmp, TypeProfileArgsLimit*TypeStackSlotEntries::per_arg_count());
159 }
160
161 bind(done);
162
163 if (MethodData::profile_return()) {
164 // We're right after the type profile for the last
165 // argument. tmp is the number of cells left in the
166 // CallTypeData/VirtualCallTypeData to reach its end. Non null
167 // if there's a return to profile.
168 assert(ReturnTypeEntry::static_cell_count() < TypeStackSlotEntries::per_arg_count(), "can't move past ret type");
169 shll(tmp, log2i_exact((int)DataLayout::cell_size));
170 addptr(mdp, tmp);
171 }
172 movptr(Address(rbp, frame::interpreter_frame_mdp_offset * wordSize), mdp);
173 } else {
174 assert(MethodData::profile_return(), "either profile call args or call ret");
175 update_mdp_by_constant(mdp, in_bytes(TypeEntriesAtCall::return_only_size()));
176 }
177
178 // mdp points right after the end of the
179 // CallTypeData/VirtualCallTypeData, right after the cells for the
180 // return value type if there's one
181
182 bind(profile_continue);
183 }
184 }
185
186 void InterpreterMacroAssembler::profile_return_type(Register mdp, Register ret, Register tmp) {
187 assert_different_registers(mdp, ret, tmp, _bcp_register);
188 if (ProfileInterpreter && MethodData::profile_return()) {
189 Label profile_continue;
190
191 test_method_data_pointer(mdp, profile_continue);
192
193 if (MethodData::profile_return_jsr292_only()) {
194 assert(Method::intrinsic_id_size_in_bytes() == 2, "assuming Method::_intrinsic_id is u2");
195
196 // If we don't profile all invoke bytecodes we must make sure
197 // it's a bytecode we indeed profile. We can't go back to the
198 // beginning of the ProfileData we intend to update to check its
199 // type because we're right after it and we don't known its
200 // length
201 Label do_profile;
202 cmpb(Address(_bcp_register, 0), Bytecodes::_invokedynamic);
203 jcc(Assembler::equal, do_profile);
204 cmpb(Address(_bcp_register, 0), Bytecodes::_invokehandle);
205 jcc(Assembler::equal, do_profile);
206 get_method(tmp);
207 cmpw(Address(tmp, Method::intrinsic_id_offset()), static_cast<int>(vmIntrinsics::_compiledLambdaForm));
208 jcc(Assembler::notEqual, profile_continue);
209
210 bind(do_profile);
211 }
212
213 Address mdo_ret_addr(mdp, -in_bytes(ReturnTypeEntry::size()));
214 mov(tmp, ret);
215 profile_obj_type(tmp, mdo_ret_addr);
216
217 bind(profile_continue);
218 }
219 }
220
221 void InterpreterMacroAssembler::profile_parameters_type(Register mdp, Register tmp1, Register tmp2) {
222 if (ProfileInterpreter && MethodData::profile_parameters()) {
223 Label profile_continue;
224
225 test_method_data_pointer(mdp, profile_continue);
226
227 // Load the offset of the area within the MDO used for
228 // parameters. If it's negative we're not profiling any parameters
229 movl(tmp1, Address(mdp, in_bytes(MethodData::parameters_type_data_di_offset()) - in_bytes(MethodData::data_offset())));
230 testl(tmp1, tmp1);
231 jcc(Assembler::negative, profile_continue);
232
233 // Compute a pointer to the area for parameters from the offset
234 // and move the pointer to the slot for the last
235 // parameters. Collect profiling from last parameter down.
236 // mdo start + parameters offset + array length - 1
237 addptr(mdp, tmp1);
238 movptr(tmp1, Address(mdp, ArrayData::array_len_offset()));
239 decrement(tmp1, TypeStackSlotEntries::per_arg_count());
240
241 Label loop;
242 bind(loop);
243
244 int off_base = in_bytes(ParametersTypeData::stack_slot_offset(0));
245 int type_base = in_bytes(ParametersTypeData::type_offset(0));
246 Address::ScaleFactor per_arg_scale = Address::times(DataLayout::cell_size);
247 Address arg_off(mdp, tmp1, per_arg_scale, off_base);
248 Address arg_type(mdp, tmp1, per_arg_scale, type_base);
249
250 // load offset on the stack from the slot for this parameter
251 movptr(tmp2, arg_off);
252 negptr(tmp2);
253 // read the parameter from the local area
254 movptr(tmp2, Address(_locals_register, tmp2, Interpreter::stackElementScale()));
255
256 // profile the parameter
257 profile_obj_type(tmp2, arg_type);
258
259 // go to next parameter
260 decrement(tmp1, TypeStackSlotEntries::per_arg_count());
261 jcc(Assembler::positive, loop);
262
263 bind(profile_continue);
264 }
265 }
266
267 void InterpreterMacroAssembler::call_VM_leaf_base(address entry_point,
268 int number_of_arguments) {
269 // interpreter specific
270 //
271 // Note: No need to save/restore bcp & locals registers
272 // since these are callee saved registers and no blocking/
273 // GC can happen in leaf calls.
274 // Further Note: DO NOT save/restore bcp/locals. If a caller has
275 // already saved them so that it can use rsi/rdi as temporaries
276 // then a save/restore here will DESTROY the copy the caller
277 // saved! There used to be a save_bcp() that only happened in
278 // the ASSERT path (no restore_bcp). Which caused bizarre failures
279 // when jvm built with ASSERTs.
280 #ifdef ASSERT
281 {
282 Label L;
283 cmpptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), NULL_WORD);
284 jcc(Assembler::equal, L);
285 stop("InterpreterMacroAssembler::call_VM_leaf_base:"
286 " last_sp != null");
287 bind(L);
288 }
289 #endif
290 // super call
291 MacroAssembler::call_VM_leaf_base(entry_point, number_of_arguments);
292 // interpreter specific
293 // LP64: Used to ASSERT that r13/r14 were equal to frame's bcp/locals
294 // but since they may not have been saved (and we don't want to
295 // save them here (see note above) the assert is invalid.
296 }
297
298 void InterpreterMacroAssembler::call_VM_base(Register oop_result,
299 Register java_thread,
300 Register last_java_sp,
301 address entry_point,
302 int number_of_arguments,
303 bool check_exceptions) {
304 // interpreter specific
305 //
306 // Note: Could avoid restoring locals ptr (callee saved) - however doesn't
307 // really make a difference for these runtime calls, since they are
308 // slow anyway. Btw., bcp must be saved/restored since it may change
309 // due to GC.
310 save_bcp();
311 #ifdef ASSERT
312 {
313 Label L;
314 cmpptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), NULL_WORD);
315 jcc(Assembler::equal, L);
316 stop("InterpreterMacroAssembler::call_VM_base:"
317 " last_sp isn't null");
318 bind(L);
319 }
320 #endif /* ASSERT */
321 // super call
322 MacroAssembler::call_VM_base(oop_result, noreg, last_java_sp,
323 entry_point, number_of_arguments,
324 check_exceptions);
325 // interpreter specific
326 restore_bcp();
327 restore_locals();
328 }
329
330 void InterpreterMacroAssembler::call_VM_preemptable(Register oop_result,
331 address entry_point,
332 Register arg_1) {
333 assert(arg_1 == c_rarg1, "");
334 Label resume_pc, not_preempted;
335
336 #ifdef ASSERT
337 {
338 Label L;
339 cmpptr(Address(r15_thread, JavaThread::preempt_alternate_return_offset()), NULL_WORD);
340 jcc(Assembler::equal, L);
341 stop("Should not have alternate return address set");
342 bind(L);
343 }
344 #endif /* ASSERT */
345
346 // Force freeze slow path.
347 push_cont_fastpath();
348
349 // Make VM call. In case of preemption set last_pc to the one we want to resume to.
350 // Note: call_VM_helper requires last_Java_pc for anchor to be at the top of the stack.
351 lea(rscratch1, resume_pc);
352 push(rscratch1);
353 MacroAssembler::call_VM_helper(oop_result, entry_point, 1, false /*check_exceptions*/);
354 pop(rscratch1);
355
356 pop_cont_fastpath();
357
358 // Check if preempted.
359 movptr(rscratch1, Address(r15_thread, JavaThread::preempt_alternate_return_offset()));
360 cmpptr(rscratch1, NULL_WORD);
361 jccb(Assembler::zero, not_preempted);
362 movptr(Address(r15_thread, JavaThread::preempt_alternate_return_offset()), NULL_WORD);
363 jmp(rscratch1);
364
365 // In case of preemption, this is where we will resume once we finally acquire the monitor.
366 bind(resume_pc);
367 restore_after_resume(false /* is_native */);
368
369 bind(not_preempted);
370 }
371
372 void InterpreterMacroAssembler::restore_after_resume(bool is_native) {
373 lea(rscratch1, ExternalAddress(Interpreter::cont_resume_interpreter_adapter()));
374 call(rscratch1);
375 if (is_native) {
376 // On resume we need to set up stack as expected.
377 push(dtos);
378 push(ltos);
379 }
380 }
381
382 void InterpreterMacroAssembler::check_and_handle_popframe(Register java_thread) {
383 if (JvmtiExport::can_pop_frame()) {
384 Label L;
385 // Initiate popframe handling only if it is not already being
386 // processed. If the flag has the popframe_processing bit set, it
387 // means that this code is called *during* popframe handling - we
388 // don't want to reenter.
389 // This method is only called just after the call into the vm in
390 // call_VM_base, so the arg registers are available.
391 Register pop_cond = c_rarg0;
392 movl(pop_cond, Address(java_thread, JavaThread::popframe_condition_offset()));
393 testl(pop_cond, JavaThread::popframe_pending_bit);
394 jcc(Assembler::zero, L);
395 testl(pop_cond, JavaThread::popframe_processing_bit);
396 jcc(Assembler::notZero, L);
397 // Call Interpreter::remove_activation_preserving_args_entry() to get the
398 // address of the same-named entrypoint in the generated interpreter code.
399 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_preserving_args_entry));
400 jmp(rax);
401 bind(L);
402 }
403 }
404
405 void InterpreterMacroAssembler::load_earlyret_value(TosState state) {
406 movptr(rcx, Address(r15_thread, JavaThread::jvmti_thread_state_offset()));
407 const Address tos_addr(rcx, JvmtiThreadState::earlyret_tos_offset());
408 const Address oop_addr(rcx, JvmtiThreadState::earlyret_oop_offset());
409 const Address val_addr(rcx, JvmtiThreadState::earlyret_value_offset());
410
411 switch (state) {
412 case atos: movptr(rax, oop_addr);
413 movptr(oop_addr, NULL_WORD);
414 interp_verify_oop(rax, state); break;
415 case ltos: movptr(rax, val_addr); break;
416 case btos: // fall through
417 case ztos: // fall through
418 case ctos: // fall through
419 case stos: // fall through
420 case itos: movl(rax, val_addr); break;
421 case ftos: load_float(val_addr); break;
422 case dtos: load_double(val_addr); break;
423 case vtos: /* nothing to do */ break;
424 default : ShouldNotReachHere();
425 }
426
427 // Clean up tos value in the thread object
428 movl(tos_addr, ilgl);
429 movptr(val_addr, NULL_WORD);
430 }
431
432
433 void InterpreterMacroAssembler::check_and_handle_earlyret(Register java_thread) {
434 if (JvmtiExport::can_force_early_return()) {
435 Label L;
436 Register tmp = c_rarg0;
437 Register rthread = r15_thread;
438
439 movptr(tmp, Address(rthread, JavaThread::jvmti_thread_state_offset()));
440 testptr(tmp, tmp);
441 jcc(Assembler::zero, L); // if (thread->jvmti_thread_state() == nullptr) exit;
442
443 // Initiate earlyret handling only if it is not already being processed.
444 // If the flag has the earlyret_processing bit set, it means that this code
445 // is called *during* earlyret handling - we don't want to reenter.
446 movl(tmp, Address(tmp, JvmtiThreadState::earlyret_state_offset()));
447 cmpl(tmp, JvmtiThreadState::earlyret_pending);
448 jcc(Assembler::notEqual, L);
449
450 // Call Interpreter::remove_activation_early_entry() to get the address of the
451 // same-named entrypoint in the generated interpreter code.
452 movptr(tmp, Address(rthread, JavaThread::jvmti_thread_state_offset()));
453 movl(tmp, Address(tmp, JvmtiThreadState::earlyret_tos_offset()));
454 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_early_entry), tmp);
455 jmp(rax);
456 bind(L);
457 }
458 }
459
460 void InterpreterMacroAssembler::get_unsigned_2_byte_index_at_bcp(Register reg, int bcp_offset) {
461 assert(bcp_offset >= 0, "bcp is still pointing to start of bytecode");
462 load_unsigned_short(reg, Address(_bcp_register, bcp_offset));
463 bswapl(reg);
464 shrl(reg, 16);
465 }
466
467 void InterpreterMacroAssembler::get_cache_index_at_bcp(Register index,
468 int bcp_offset,
469 size_t index_size) {
470 assert(bcp_offset > 0, "bcp is still pointing to start of bytecode");
471 if (index_size == sizeof(u2)) {
472 load_unsigned_short(index, Address(_bcp_register, bcp_offset));
473 } else if (index_size == sizeof(u4)) {
474 movl(index, Address(_bcp_register, bcp_offset));
475 } else if (index_size == sizeof(u1)) {
476 load_unsigned_byte(index, Address(_bcp_register, bcp_offset));
477 } else {
478 ShouldNotReachHere();
479 }
480 }
481
482 // Load object from cpool->resolved_references(index)
483 void InterpreterMacroAssembler::load_resolved_reference_at_index(Register result,
484 Register index,
485 Register tmp) {
486 assert_different_registers(result, index);
487
488 get_constant_pool(result);
489 // load pointer for resolved_references[] objArray
490 movptr(result, Address(result, ConstantPool::cache_offset()));
491 movptr(result, Address(result, ConstantPoolCache::resolved_references_offset()));
492 resolve_oop_handle(result, tmp);
493 load_heap_oop(result, Address(result, index,
494 UseCompressedOops ? Address::times_4 : Address::times_ptr,
495 arrayOopDesc::base_offset_in_bytes(T_OBJECT)), tmp);
496 }
497
498 // load cpool->resolved_klass_at(index)
499 void InterpreterMacroAssembler::load_resolved_klass_at_index(Register klass,
500 Register cpool,
501 Register index) {
502 assert_different_registers(cpool, index);
503
504 movw(index, Address(cpool, index, Address::times_ptr, sizeof(ConstantPool)));
505 Register resolved_klasses = cpool;
506 movptr(resolved_klasses, Address(cpool, ConstantPool::resolved_klasses_offset()));
507 movptr(klass, Address(resolved_klasses, index, Address::times_ptr, Array<Klass*>::base_offset_in_bytes()));
508 }
509
510 // Generate a subtype check: branch to ok_is_subtype if sub_klass is a
511 // subtype of super_klass.
512 //
513 // Args:
514 // rax: superklass
515 // Rsub_klass: subklass
516 //
517 // Kills:
518 // rcx, rdi
519 void InterpreterMacroAssembler::gen_subtype_check(Register Rsub_klass,
520 Label& ok_is_subtype) {
521 assert(Rsub_klass != rax, "rax holds superklass");
522 LP64_ONLY(assert(Rsub_klass != r14, "r14 holds locals");)
523 LP64_ONLY(assert(Rsub_klass != r13, "r13 holds bcp");)
524 assert(Rsub_klass != rcx, "rcx holds 2ndary super array length");
525 assert(Rsub_klass != rdi, "rdi holds 2ndary super array scan ptr");
526
527 // Profile the not-null value's klass.
528 profile_typecheck(rcx, Rsub_klass, rdi); // blows rcx, reloads rdi
529
530 // Do the check.
531 check_klass_subtype(Rsub_klass, rax, rcx, ok_is_subtype); // blows rcx
532 }
533
534
535 // Java Expression Stack
536
537 void InterpreterMacroAssembler::pop_ptr(Register r) {
538 pop(r);
539 }
540
541 void InterpreterMacroAssembler::push_ptr(Register r) {
542 push(r);
543 }
544
545 void InterpreterMacroAssembler::push_i(Register r) {
546 push(r);
547 }
548
549 void InterpreterMacroAssembler::push_i_or_ptr(Register r) {
550 push(r);
551 }
552
553 void InterpreterMacroAssembler::push_f(XMMRegister r) {
554 subptr(rsp, wordSize);
555 movflt(Address(rsp, 0), r);
556 }
557
558 void InterpreterMacroAssembler::pop_f(XMMRegister r) {
559 movflt(r, Address(rsp, 0));
560 addptr(rsp, wordSize);
561 }
562
563 void InterpreterMacroAssembler::push_d(XMMRegister r) {
564 subptr(rsp, 2 * wordSize);
565 movdbl(Address(rsp, 0), r);
566 }
567
568 void InterpreterMacroAssembler::pop_d(XMMRegister r) {
569 movdbl(r, Address(rsp, 0));
570 addptr(rsp, 2 * Interpreter::stackElementSize);
571 }
572
573 void InterpreterMacroAssembler::pop_i(Register r) {
574 // XXX can't use pop currently, upper half non clean
575 movl(r, Address(rsp, 0));
576 addptr(rsp, wordSize);
577 }
578
579 void InterpreterMacroAssembler::pop_l(Register r) {
580 movq(r, Address(rsp, 0));
581 addptr(rsp, 2 * Interpreter::stackElementSize);
582 }
583
584 void InterpreterMacroAssembler::push_l(Register r) {
585 subptr(rsp, 2 * wordSize);
586 movptr(Address(rsp, Interpreter::expr_offset_in_bytes(0)), r );
587 movptr(Address(rsp, Interpreter::expr_offset_in_bytes(1)), NULL_WORD );
588 }
589
590 void InterpreterMacroAssembler::pop(TosState state) {
591 switch (state) {
592 case atos: pop_ptr(); break;
593 case btos:
594 case ztos:
595 case ctos:
596 case stos:
597 case itos: pop_i(); break;
598 case ltos: pop_l(); break;
599 case ftos: pop_f(xmm0); break;
600 case dtos: pop_d(xmm0); break;
601 case vtos: /* nothing to do */ break;
602 default: ShouldNotReachHere();
603 }
604 interp_verify_oop(rax, state);
605 }
606
607 void InterpreterMacroAssembler::push(TosState state) {
608 interp_verify_oop(rax, state);
609 switch (state) {
610 case atos: push_ptr(); break;
611 case btos:
612 case ztos:
613 case ctos:
614 case stos:
615 case itos: push_i(); break;
616 case ltos: push_l(); break;
617 case ftos: push_f(xmm0); break;
618 case dtos: push_d(xmm0); break;
619 case vtos: /* nothing to do */ break;
620 default : ShouldNotReachHere();
621 }
622 }
623
624 // Helpers for swap and dup
625 void InterpreterMacroAssembler::load_ptr(int n, Register val) {
626 movptr(val, Address(rsp, Interpreter::expr_offset_in_bytes(n)));
627 }
628
629 void InterpreterMacroAssembler::store_ptr(int n, Register val) {
630 movptr(Address(rsp, Interpreter::expr_offset_in_bytes(n)), val);
631 }
632
633
634 void InterpreterMacroAssembler::prepare_to_jump_from_interpreted() {
635 // set sender sp
636 lea(_bcp_register, Address(rsp, wordSize));
637 // record last_sp
638 mov(rcx, _bcp_register);
639 subptr(rcx, rbp);
640 sarptr(rcx, LogBytesPerWord);
641 movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), rcx);
642 }
643
644
645 // Jump to from_interpreted entry of a call unless single stepping is possible
646 // in this thread in which case we must call the i2i entry
647 void InterpreterMacroAssembler::jump_from_interpreted(Register method, Register temp) {
648 prepare_to_jump_from_interpreted();
649
650 if (JvmtiExport::can_post_interpreter_events()) {
651 Label run_compiled_code;
652 // JVMTI events, such as single-stepping, are implemented partly by avoiding running
653 // compiled code in threads for which the event is enabled. Check here for
654 // interp_only_mode if these events CAN be enabled.
655 // interp_only is an int, on little endian it is sufficient to test the byte only
656 // Is a cmpl faster?
657 cmpb(Address(r15_thread, JavaThread::interp_only_mode_offset()), 0);
658 jccb(Assembler::zero, run_compiled_code);
659 jmp(Address(method, Method::interpreter_entry_offset()));
660 bind(run_compiled_code);
661 }
662
663 jmp(Address(method, Method::from_interpreted_offset()));
664 }
665
666 // The following two routines provide a hook so that an implementation
667 // can schedule the dispatch in two parts. x86 does not do this.
668 void InterpreterMacroAssembler::dispatch_prolog(TosState state, int step) {
669 // Nothing x86 specific to be done here
670 }
671
672 void InterpreterMacroAssembler::dispatch_epilog(TosState state, int step) {
673 dispatch_next(state, step);
674 }
675
676 void InterpreterMacroAssembler::dispatch_base(TosState state,
677 address* table,
678 bool verifyoop,
679 bool generate_poll) {
680 if (VerifyActivationFrameSize) {
681 Label L;
682 mov(rcx, rbp);
683 subptr(rcx, rsp);
684 int32_t min_frame_size =
685 (frame::link_offset - frame::interpreter_frame_initial_sp_offset) *
686 wordSize;
687 cmpptr(rcx, min_frame_size);
688 jcc(Assembler::greaterEqual, L);
689 stop("broken stack frame");
690 bind(L);
691 }
692 if (verifyoop) {
693 interp_verify_oop(rax, state);
694 }
695
696 address* const safepoint_table = Interpreter::safept_table(state);
697 Label no_safepoint, dispatch;
698 if (table != safepoint_table && generate_poll) {
699 NOT_PRODUCT(block_comment("Thread-local Safepoint poll"));
700 testb(Address(r15_thread, JavaThread::polling_word_offset()), SafepointMechanism::poll_bit());
701
702 jccb(Assembler::zero, no_safepoint);
703 lea(rscratch1, ExternalAddress((address)safepoint_table));
704 jmpb(dispatch);
705 }
706
707 bind(no_safepoint);
708 lea(rscratch1, ExternalAddress((address)table));
709 bind(dispatch);
710 jmp(Address(rscratch1, rbx, Address::times_8));
711 }
712
713 void InterpreterMacroAssembler::dispatch_only(TosState state, bool generate_poll) {
714 dispatch_base(state, Interpreter::dispatch_table(state), true, generate_poll);
715 }
716
717 void InterpreterMacroAssembler::dispatch_only_normal(TosState state) {
718 dispatch_base(state, Interpreter::normal_table(state));
719 }
720
721 void InterpreterMacroAssembler::dispatch_only_noverify(TosState state) {
722 dispatch_base(state, Interpreter::normal_table(state), false);
723 }
724
725
726 void InterpreterMacroAssembler::dispatch_next(TosState state, int step, bool generate_poll) {
727 // load next bytecode (load before advancing _bcp_register to prevent AGI)
728 load_unsigned_byte(rbx, Address(_bcp_register, step));
729 // advance _bcp_register
730 increment(_bcp_register, step);
731 dispatch_base(state, Interpreter::dispatch_table(state), true, generate_poll);
732 }
733
734 void InterpreterMacroAssembler::dispatch_via(TosState state, address* table) {
735 // load current bytecode
736 load_unsigned_byte(rbx, Address(_bcp_register, 0));
737 dispatch_base(state, table);
738 }
739
740 void InterpreterMacroAssembler::narrow(Register result) {
741
742 // Get method->_constMethod->_result_type
743 movptr(rcx, Address(rbp, frame::interpreter_frame_method_offset * wordSize));
744 movptr(rcx, Address(rcx, Method::const_offset()));
745 load_unsigned_byte(rcx, Address(rcx, ConstMethod::result_type_offset()));
746
747 Label done, notBool, notByte, notChar;
748
749 // common case first
750 cmpl(rcx, T_INT);
751 jcc(Assembler::equal, done);
752
753 // mask integer result to narrower return type.
754 cmpl(rcx, T_BOOLEAN);
755 jcc(Assembler::notEqual, notBool);
756 andl(result, 0x1);
757 jmp(done);
758
759 bind(notBool);
760 cmpl(rcx, T_BYTE);
761 jcc(Assembler::notEqual, notByte);
762 movsbl(result, result);
763 jmp(done);
764
765 bind(notByte);
766 cmpl(rcx, T_CHAR);
767 jcc(Assembler::notEqual, notChar);
768 movzwl(result, result);
769 jmp(done);
770
771 bind(notChar);
772 // cmpl(rcx, T_SHORT); // all that's left
773 // jcc(Assembler::notEqual, done);
774 movswl(result, result);
775
776 // Nothing to do for T_INT
777 bind(done);
778 }
779
780 // remove activation
781 //
782 // Apply stack watermark barrier.
783 // Unlock the receiver if this is a synchronized method.
784 // Unlock any Java monitors from synchronized blocks.
785 // Remove the activation from the stack.
786 //
787 // If there are locked Java monitors
788 // If throw_monitor_exception
789 // throws IllegalMonitorStateException
790 // Else if install_monitor_exception
791 // installs IllegalMonitorStateException
792 // Else
793 // no error processing
794 void InterpreterMacroAssembler::remove_activation(
795 TosState state,
796 Register ret_addr,
797 bool throw_monitor_exception,
798 bool install_monitor_exception,
799 bool notify_jvmdi) {
800 // Note: Registers rdx xmm0 may be in use for the
801 // result check if synchronized method
802 Label unlocked, unlock, no_unlock;
803
804 const Register rthread = r15_thread;
805 const Register robj = c_rarg1;
806 const Register rmon = c_rarg1;
807
808 // The below poll is for the stack watermark barrier. It allows fixing up frames lazily,
809 // that would normally not be safe to use. Such bad returns into unsafe territory of
810 // the stack, will call InterpreterRuntime::at_unwind.
811 Label slow_path;
812 Label fast_path;
813 safepoint_poll(slow_path, rthread, true /* at_return */, false /* in_nmethod */);
814 jmp(fast_path);
815 bind(slow_path);
816 push(state);
817 set_last_Java_frame(rthread, noreg, rbp, (address)pc(), rscratch1);
818 super_call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::at_unwind), rthread);
819 reset_last_Java_frame(rthread, true);
820 pop(state);
821 bind(fast_path);
822
823 // get the value of _do_not_unlock_if_synchronized into rdx
824 const Address do_not_unlock_if_synchronized(rthread,
825 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()));
826 movbool(rbx, do_not_unlock_if_synchronized);
827 movbool(do_not_unlock_if_synchronized, false); // reset the flag
828
829 // get method access flags
830 movptr(rcx, Address(rbp, frame::interpreter_frame_method_offset * wordSize));
831 load_unsigned_short(rcx, Address(rcx, Method::access_flags_offset()));
832 testl(rcx, JVM_ACC_SYNCHRONIZED);
833 jcc(Assembler::zero, unlocked);
834
835 // Don't unlock anything if the _do_not_unlock_if_synchronized flag
836 // is set.
837 testbool(rbx);
838 jcc(Assembler::notZero, no_unlock);
839
840 // unlock monitor
841 push(state); // save result
842
843 // BasicObjectLock will be first in list, since this is a
844 // synchronized method. However, need to check that the object has
845 // not been unlocked by an explicit monitorexit bytecode.
846 const Address monitor(rbp, frame::interpreter_frame_initial_sp_offset *
847 wordSize - (int) sizeof(BasicObjectLock));
848 // We use c_rarg1/rdx so that if we go slow path it will be the correct
849 // register for unlock_object to pass to VM directly
850 lea(robj, monitor); // address of first monitor
851
852 movptr(rax, Address(robj, BasicObjectLock::obj_offset()));
853 testptr(rax, rax);
854 jcc(Assembler::notZero, unlock);
855
856 pop(state);
857 if (throw_monitor_exception) {
858 // Entry already unlocked, need to throw exception
859 call_VM(noreg, CAST_FROM_FN_PTR(address,
860 InterpreterRuntime::throw_illegal_monitor_state_exception));
861 should_not_reach_here();
862 } else {
863 // Monitor already unlocked during a stack unroll. If requested,
864 // install an illegal_monitor_state_exception. Continue with
865 // stack unrolling.
866 if (install_monitor_exception) {
867 call_VM(noreg, CAST_FROM_FN_PTR(address,
868 InterpreterRuntime::new_illegal_monitor_state_exception));
869 }
870 jmp(unlocked);
871 }
872
873 bind(unlock);
874 unlock_object(robj);
875 pop(state);
876
877 // Check that for block-structured locking (i.e., that all locked
878 // objects has been unlocked)
879 bind(unlocked);
880
881 // rax, rdx: Might contain return value
882
883 // Check that all monitors are unlocked
884 {
885 Label loop, exception, entry, restart;
886 const int entry_size = frame::interpreter_frame_monitor_size_in_bytes();
887 const Address monitor_block_top(
888 rbp, frame::interpreter_frame_monitor_block_top_offset * wordSize);
889 const Address monitor_block_bot(
890 rbp, frame::interpreter_frame_initial_sp_offset * wordSize);
891
892 bind(restart);
893 // We use c_rarg1 so that if we go slow path it will be the correct
894 // register for unlock_object to pass to VM directly
895 movptr(rmon, monitor_block_top); // derelativize pointer
896 lea(rmon, Address(rbp, rmon, Address::times_ptr));
897 // c_rarg1 points to current entry, starting with top-most entry
898
899 lea(rbx, monitor_block_bot); // points to word before bottom of
900 // monitor block
901 jmp(entry);
902
903 // Entry already locked, need to throw exception
904 bind(exception);
905
906 if (throw_monitor_exception) {
907 // Throw exception
908 MacroAssembler::call_VM(noreg,
909 CAST_FROM_FN_PTR(address, InterpreterRuntime::
910 throw_illegal_monitor_state_exception));
911 should_not_reach_here();
912 } else {
913 // Stack unrolling. Unlock object and install illegal_monitor_exception.
914 // Unlock does not block, so don't have to worry about the frame.
915 // We don't have to preserve c_rarg1 since we are going to throw an exception.
916
917 push(state);
918 mov(robj, rmon); // nop if robj and rmon are the same
919 unlock_object(robj);
920 pop(state);
921
922 if (install_monitor_exception) {
923 call_VM(noreg, CAST_FROM_FN_PTR(address,
924 InterpreterRuntime::
925 new_illegal_monitor_state_exception));
926 }
927
928 jmp(restart);
929 }
930
931 bind(loop);
932 // check if current entry is used
933 cmpptr(Address(rmon, BasicObjectLock::obj_offset()), NULL_WORD);
934 jcc(Assembler::notEqual, exception);
935
936 addptr(rmon, entry_size); // otherwise advance to next entry
937 bind(entry);
938 cmpptr(rmon, rbx); // check if bottom reached
939 jcc(Assembler::notEqual, loop); // if not at bottom then check this entry
940 }
941
942 bind(no_unlock);
943
944 // jvmti support
945 if (notify_jvmdi) {
946 notify_method_exit(state, NotifyJVMTI); // preserve TOSCA
947 } else {
948 notify_method_exit(state, SkipNotifyJVMTI); // preserve TOSCA
949 }
950
951 // remove activation
952 // get sender sp
953 movptr(rbx,
954 Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize));
955 if (StackReservedPages > 0) {
956 // testing if reserved zone needs to be re-enabled
957 Register rthread = r15_thread;
958 Label no_reserved_zone_enabling;
959
960 // check if already enabled - if so no re-enabling needed
961 assert(sizeof(StackOverflow::StackGuardState) == 4, "unexpected size");
962 cmpl(Address(rthread, JavaThread::stack_guard_state_offset()), StackOverflow::stack_guard_enabled);
963 jcc(Assembler::equal, no_reserved_zone_enabling);
964
965 cmpptr(rbx, Address(rthread, JavaThread::reserved_stack_activation_offset()));
966 jcc(Assembler::lessEqual, no_reserved_zone_enabling);
967
968 call_VM_leaf(
969 CAST_FROM_FN_PTR(address, SharedRuntime::enable_stack_reserved_zone), rthread);
970 call_VM(noreg, CAST_FROM_FN_PTR(address,
971 InterpreterRuntime::throw_delayed_StackOverflowError));
972 should_not_reach_here();
973
974 bind(no_reserved_zone_enabling);
975 }
976 leave(); // remove frame anchor
977 pop(ret_addr); // get return address
978 mov(rsp, rbx); // set sp to sender sp
979 pop_cont_fastpath();
980 }
981
982 void InterpreterMacroAssembler::get_method_counters(Register method,
983 Register mcs, Label& skip) {
984 Label has_counters;
985 movptr(mcs, Address(method, Method::method_counters_offset()));
986 testptr(mcs, mcs);
987 jcc(Assembler::notZero, has_counters);
988 call_VM(noreg, CAST_FROM_FN_PTR(address,
989 InterpreterRuntime::build_method_counters), method);
990 movptr(mcs, Address(method,Method::method_counters_offset()));
991 testptr(mcs, mcs);
992 jcc(Assembler::zero, skip); // No MethodCounters allocated, OutOfMemory
993 bind(has_counters);
994 }
995
996
997 // Lock object
998 //
999 // Args:
1000 // rdx, c_rarg1: BasicObjectLock to be used for locking
1001 //
1002 // Kills:
1003 // rax, rbx
1004 void InterpreterMacroAssembler::lock_object(Register lock_reg) {
1005 assert(lock_reg == c_rarg1, "The argument is only for looks. It must be c_rarg1");
1006
1007 if (LockingMode == LM_MONITOR) {
1008 call_VM_preemptable(noreg,
1009 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter),
1010 lock_reg);
1011 } else {
1012 Label count_locking, done, slow_case;
1013
1014 const Register swap_reg = rax; // Must use rax for cmpxchg instruction
1015 const Register tmp_reg = rbx;
1016 const Register obj_reg = c_rarg3; // Will contain the oop
1017 const Register rklass_decode_tmp = rscratch1;
1018
1019 const int obj_offset = in_bytes(BasicObjectLock::obj_offset());
1020 const int lock_offset = in_bytes(BasicObjectLock::lock_offset());
1021 const int mark_offset = lock_offset +
1022 BasicLock::displaced_header_offset_in_bytes();
1023
1024 // Load object pointer into obj_reg
1025 movptr(obj_reg, Address(lock_reg, obj_offset));
1026
1027 if (DiagnoseSyncOnValueBasedClasses != 0) {
1028 load_klass(tmp_reg, obj_reg, rklass_decode_tmp);
1029 testb(Address(tmp_reg, Klass::misc_flags_offset()), KlassFlags::_misc_is_value_based_class);
1030 jcc(Assembler::notZero, slow_case);
1031 }
1032
1033 if (LockingMode == LM_LIGHTWEIGHT) {
1034 const Register thread = r15_thread;
1035 lightweight_lock(lock_reg, obj_reg, swap_reg, thread, tmp_reg, slow_case);
1036 } else if (LockingMode == LM_LEGACY) {
1037 // Load immediate 1 into swap_reg %rax
1038 movl(swap_reg, 1);
1039
1040 // Load (object->mark() | 1) into swap_reg %rax
1041 orptr(swap_reg, Address(obj_reg, oopDesc::mark_offset_in_bytes()));
1042
1043 // Save (object->mark() | 1) into BasicLock's displaced header
1044 movptr(Address(lock_reg, mark_offset), swap_reg);
1045
1046 assert(lock_offset == 0,
1047 "displaced header must be first word in BasicObjectLock");
1048
1049 lock();
1050 cmpxchgptr(lock_reg, Address(obj_reg, oopDesc::mark_offset_in_bytes()));
1051 jcc(Assembler::zero, count_locking);
1052
1053 const int zero_bits = 7;
1054
1055 // Fast check for recursive lock.
1056 //
1057 // Can apply the optimization only if this is a stack lock
1058 // allocated in this thread. For efficiency, we can focus on
1059 // recently allocated stack locks (instead of reading the stack
1060 // base and checking whether 'mark' points inside the current
1061 // thread stack):
1062 // 1) (mark & zero_bits) == 0, and
1063 // 2) rsp <= mark < mark + os::pagesize()
1064 //
1065 // Warning: rsp + os::pagesize can overflow the stack base. We must
1066 // neither apply the optimization for an inflated lock allocated
1067 // just above the thread stack (this is why condition 1 matters)
1068 // nor apply the optimization if the stack lock is inside the stack
1069 // of another thread. The latter is avoided even in case of overflow
1070 // because we have guard pages at the end of all stacks. Hence, if
1071 // we go over the stack base and hit the stack of another thread,
1072 // this should not be in a writeable area that could contain a
1073 // stack lock allocated by that thread. As a consequence, a stack
1074 // lock less than page size away from rsp is guaranteed to be
1075 // owned by the current thread.
1076 //
1077 // These 3 tests can be done by evaluating the following
1078 // expression: ((mark - rsp) & (zero_bits - os::vm_page_size())),
1079 // assuming both stack pointer and pagesize have their
1080 // least significant bits clear.
1081 // NOTE: the mark is in swap_reg %rax as the result of cmpxchg
1082 subptr(swap_reg, rsp);
1083 andptr(swap_reg, zero_bits - (int)os::vm_page_size());
1084
1085 // Save the test result, for recursive case, the result is zero
1086 movptr(Address(lock_reg, mark_offset), swap_reg);
1087 jcc(Assembler::notZero, slow_case);
1088
1089 bind(count_locking);
1090 inc_held_monitor_count();
1091 }
1092 jmp(done);
1093
1094 bind(slow_case);
1095
1096 // Call the runtime routine for slow case
1097 call_VM_preemptable(noreg,
1098 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter),
1099 lock_reg);
1100 bind(done);
1101 }
1102 }
1103
1104
1105 // Unlocks an object. Used in monitorexit bytecode and
1106 // remove_activation. Throws an IllegalMonitorException if object is
1107 // not locked by current thread.
1108 //
1109 // Args:
1110 // rdx, c_rarg1: BasicObjectLock for lock
1111 //
1112 // Kills:
1113 // rax
1114 // c_rarg0, c_rarg1, c_rarg2, c_rarg3, ... (param regs)
1115 // rscratch1 (scratch reg)
1116 // rax, rbx, rcx, rdx
1117 void InterpreterMacroAssembler::unlock_object(Register lock_reg) {
1118 assert(lock_reg == c_rarg1, "The argument is only for looks. It must be c_rarg1");
1119
1120 if (LockingMode == LM_MONITOR) {
1121 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), lock_reg);
1122 } else {
1123 Label count_locking, done, slow_case;
1124
1125 const Register swap_reg = rax; // Must use rax for cmpxchg instruction
1126 const Register header_reg = c_rarg2; // Will contain the old oopMark
1127 const Register obj_reg = c_rarg3; // Will contain the oop
1128
1129 save_bcp(); // Save in case of exception
1130
1131 if (LockingMode != LM_LIGHTWEIGHT) {
1132 // Convert from BasicObjectLock structure to object and BasicLock
1133 // structure Store the BasicLock address into %rax
1134 lea(swap_reg, Address(lock_reg, BasicObjectLock::lock_offset()));
1135 }
1136
1137 // Load oop into obj_reg(%c_rarg3)
1138 movptr(obj_reg, Address(lock_reg, BasicObjectLock::obj_offset()));
1139
1140 // Free entry
1141 movptr(Address(lock_reg, BasicObjectLock::obj_offset()), NULL_WORD);
1142
1143 if (LockingMode == LM_LIGHTWEIGHT) {
1144 lightweight_unlock(obj_reg, swap_reg, r15_thread, header_reg, slow_case);
1145 } else if (LockingMode == LM_LEGACY) {
1146 // Load the old header from BasicLock structure
1147 movptr(header_reg, Address(swap_reg,
1148 BasicLock::displaced_header_offset_in_bytes()));
1149
1150 // Test for recursion
1151 testptr(header_reg, header_reg);
1152
1153 // zero for recursive case
1154 jcc(Assembler::zero, count_locking);
1155
1156 // Atomic swap back the old header
1157 lock();
1158 cmpxchgptr(header_reg, Address(obj_reg, oopDesc::mark_offset_in_bytes()));
1159
1160 // zero for simple unlock of a stack-lock case
1161 jcc(Assembler::notZero, slow_case);
1162
1163 bind(count_locking);
1164 dec_held_monitor_count();
1165 }
1166 jmp(done);
1167
1168 bind(slow_case);
1169 // Call the runtime routine for slow case.
1170 movptr(Address(lock_reg, BasicObjectLock::obj_offset()), obj_reg); // restore obj
1171 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), lock_reg);
1172
1173 bind(done);
1174
1175 restore_bcp();
1176 }
1177 }
1178
1179 void InterpreterMacroAssembler::test_method_data_pointer(Register mdp,
1180 Label& zero_continue) {
1181 assert(ProfileInterpreter, "must be profiling interpreter");
1182 movptr(mdp, Address(rbp, frame::interpreter_frame_mdp_offset * wordSize));
1183 testptr(mdp, mdp);
1184 jcc(Assembler::zero, zero_continue);
1185 }
1186
1187
1188 // Set the method data pointer for the current bcp.
1189 void InterpreterMacroAssembler::set_method_data_pointer_for_bcp() {
1190 assert(ProfileInterpreter, "must be profiling interpreter");
1191 Label set_mdp;
1192 push(rax);
1193 push(rbx);
1194
1195 get_method(rbx);
1196 // Test MDO to avoid the call if it is null.
1197 movptr(rax, Address(rbx, in_bytes(Method::method_data_offset())));
1198 testptr(rax, rax);
1199 jcc(Assembler::zero, set_mdp);
1200 // rbx: method
1201 // _bcp_register: bcp
1202 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::bcp_to_di), rbx, _bcp_register);
1203 // rax: mdi
1204 // mdo is guaranteed to be non-zero here, we checked for it before the call.
1205 movptr(rbx, Address(rbx, in_bytes(Method::method_data_offset())));
1206 addptr(rbx, in_bytes(MethodData::data_offset()));
1207 addptr(rax, rbx);
1208 bind(set_mdp);
1209 movptr(Address(rbp, frame::interpreter_frame_mdp_offset * wordSize), rax);
1210 pop(rbx);
1211 pop(rax);
1212 }
1213
1214 void InterpreterMacroAssembler::verify_method_data_pointer() {
1215 assert(ProfileInterpreter, "must be profiling interpreter");
1216 #ifdef ASSERT
1217 Label verify_continue;
1218 push(rax);
1219 push(rbx);
1220 Register arg3_reg = c_rarg3;
1221 Register arg2_reg = c_rarg2;
1222 push(arg3_reg);
1223 push(arg2_reg);
1224 test_method_data_pointer(arg3_reg, verify_continue); // If mdp is zero, continue
1225 get_method(rbx);
1226
1227 // If the mdp is valid, it will point to a DataLayout header which is
1228 // consistent with the bcp. The converse is highly probable also.
1229 load_unsigned_short(arg2_reg,
1230 Address(arg3_reg, in_bytes(DataLayout::bci_offset())));
1231 addptr(arg2_reg, Address(rbx, Method::const_offset()));
1232 lea(arg2_reg, Address(arg2_reg, ConstMethod::codes_offset()));
1233 cmpptr(arg2_reg, _bcp_register);
1234 jcc(Assembler::equal, verify_continue);
1235 // rbx: method
1236 // _bcp_register: bcp
1237 // c_rarg3: mdp
1238 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::verify_mdp),
1239 rbx, _bcp_register, arg3_reg);
1240 bind(verify_continue);
1241 pop(arg2_reg);
1242 pop(arg3_reg);
1243 pop(rbx);
1244 pop(rax);
1245 #endif // ASSERT
1246 }
1247
1248
1249 void InterpreterMacroAssembler::set_mdp_data_at(Register mdp_in,
1250 int constant,
1251 Register value) {
1252 assert(ProfileInterpreter, "must be profiling interpreter");
1253 Address data(mdp_in, constant);
1254 movptr(data, value);
1255 }
1256
1257
1258 void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in,
1259 int constant,
1260 bool decrement) {
1261 // Counter address
1262 Address data(mdp_in, constant);
1263
1264 increment_mdp_data_at(data, decrement);
1265 }
1266
1267 void InterpreterMacroAssembler::increment_mdp_data_at(Address data,
1268 bool decrement) {
1269 assert(ProfileInterpreter, "must be profiling interpreter");
1270 // %%% this does 64bit counters at best it is wasting space
1271 // at worst it is a rare bug when counters overflow
1272
1273 if (decrement) {
1274 // Decrement the register. Set condition codes.
1275 addptr(data, -DataLayout::counter_increment);
1276 // If the decrement causes the counter to overflow, stay negative
1277 Label L;
1278 jcc(Assembler::negative, L);
1279 addptr(data, DataLayout::counter_increment);
1280 bind(L);
1281 } else {
1282 assert(DataLayout::counter_increment == 1,
1283 "flow-free idiom only works with 1");
1284 // Increment the register. Set carry flag.
1285 addptr(data, DataLayout::counter_increment);
1286 // If the increment causes the counter to overflow, pull back by 1.
1287 sbbptr(data, 0);
1288 }
1289 }
1290
1291
1292 void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in,
1293 Register reg,
1294 int constant,
1295 bool decrement) {
1296 Address data(mdp_in, reg, Address::times_1, constant);
1297
1298 increment_mdp_data_at(data, decrement);
1299 }
1300
1301 void InterpreterMacroAssembler::set_mdp_flag_at(Register mdp_in,
1302 int flag_byte_constant) {
1303 assert(ProfileInterpreter, "must be profiling interpreter");
1304 int header_offset = in_bytes(DataLayout::flags_offset());
1305 int header_bits = flag_byte_constant;
1306 // Set the flag
1307 orb(Address(mdp_in, header_offset), header_bits);
1308 }
1309
1310
1311
1312 void InterpreterMacroAssembler::test_mdp_data_at(Register mdp_in,
1313 int offset,
1314 Register value,
1315 Register test_value_out,
1316 Label& not_equal_continue) {
1317 assert(ProfileInterpreter, "must be profiling interpreter");
1318 if (test_value_out == noreg) {
1319 cmpptr(value, Address(mdp_in, offset));
1320 } else {
1321 // Put the test value into a register, so caller can use it:
1322 movptr(test_value_out, Address(mdp_in, offset));
1323 cmpptr(test_value_out, value);
1324 }
1325 jcc(Assembler::notEqual, not_equal_continue);
1326 }
1327
1328
1329 void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in,
1330 int offset_of_disp) {
1331 assert(ProfileInterpreter, "must be profiling interpreter");
1332 Address disp_address(mdp_in, offset_of_disp);
1333 addptr(mdp_in, disp_address);
1334 movptr(Address(rbp, frame::interpreter_frame_mdp_offset * wordSize), mdp_in);
1335 }
1336
1337
1338 void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in,
1339 Register reg,
1340 int offset_of_disp) {
1341 assert(ProfileInterpreter, "must be profiling interpreter");
1342 Address disp_address(mdp_in, reg, Address::times_1, offset_of_disp);
1343 addptr(mdp_in, disp_address);
1344 movptr(Address(rbp, frame::interpreter_frame_mdp_offset * wordSize), mdp_in);
1345 }
1346
1347
1348 void InterpreterMacroAssembler::update_mdp_by_constant(Register mdp_in,
1349 int constant) {
1350 assert(ProfileInterpreter, "must be profiling interpreter");
1351 addptr(mdp_in, constant);
1352 movptr(Address(rbp, frame::interpreter_frame_mdp_offset * wordSize), mdp_in);
1353 }
1354
1355
1356 void InterpreterMacroAssembler::update_mdp_for_ret(Register return_bci) {
1357 assert(ProfileInterpreter, "must be profiling interpreter");
1358 push(return_bci); // save/restore across call_VM
1359 call_VM(noreg,
1360 CAST_FROM_FN_PTR(address, InterpreterRuntime::update_mdp_for_ret),
1361 return_bci);
1362 pop(return_bci);
1363 }
1364
1365
1366 void InterpreterMacroAssembler::profile_taken_branch(Register mdp,
1367 Register bumped_count) {
1368 if (ProfileInterpreter) {
1369 Label profile_continue;
1370
1371 // If no method data exists, go to profile_continue.
1372 // Otherwise, assign to mdp
1373 test_method_data_pointer(mdp, profile_continue);
1374
1375 // We are taking a branch. Increment the taken count.
1376 // We inline increment_mdp_data_at to return bumped_count in a register
1377 //increment_mdp_data_at(mdp, in_bytes(JumpData::taken_offset()));
1378 Address data(mdp, in_bytes(JumpData::taken_offset()));
1379 movptr(bumped_count, data);
1380 assert(DataLayout::counter_increment == 1,
1381 "flow-free idiom only works with 1");
1382 addptr(bumped_count, DataLayout::counter_increment);
1383 sbbptr(bumped_count, 0);
1384 movptr(data, bumped_count); // Store back out
1385
1386 // The method data pointer needs to be updated to reflect the new target.
1387 update_mdp_by_offset(mdp, in_bytes(JumpData::displacement_offset()));
1388 bind(profile_continue);
1389 }
1390 }
1391
1392
1393 void InterpreterMacroAssembler::profile_not_taken_branch(Register mdp) {
1394 if (ProfileInterpreter) {
1395 Label profile_continue;
1396
1397 // If no method data exists, go to profile_continue.
1398 test_method_data_pointer(mdp, profile_continue);
1399
1400 // We are taking a branch. Increment the not taken count.
1401 increment_mdp_data_at(mdp, in_bytes(BranchData::not_taken_offset()));
1402
1403 // The method data pointer needs to be updated to correspond to
1404 // the next bytecode
1405 update_mdp_by_constant(mdp, in_bytes(BranchData::branch_data_size()));
1406 bind(profile_continue);
1407 }
1408 }
1409
1410 void InterpreterMacroAssembler::profile_call(Register mdp) {
1411 if (ProfileInterpreter) {
1412 Label profile_continue;
1413
1414 // If no method data exists, go to profile_continue.
1415 test_method_data_pointer(mdp, profile_continue);
1416
1417 // We are making a call. Increment the count.
1418 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1419
1420 // The method data pointer needs to be updated to reflect the new target.
1421 update_mdp_by_constant(mdp, in_bytes(CounterData::counter_data_size()));
1422 bind(profile_continue);
1423 }
1424 }
1425
1426
1427 void InterpreterMacroAssembler::profile_final_call(Register mdp) {
1428 if (ProfileInterpreter) {
1429 Label profile_continue;
1430
1431 // If no method data exists, go to profile_continue.
1432 test_method_data_pointer(mdp, profile_continue);
1433
1434 // We are making a call. Increment the count.
1435 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1436
1437 // The method data pointer needs to be updated to reflect the new target.
1438 update_mdp_by_constant(mdp,
1439 in_bytes(VirtualCallData::
1440 virtual_call_data_size()));
1441 bind(profile_continue);
1442 }
1443 }
1444
1445
1446 void InterpreterMacroAssembler::profile_virtual_call(Register receiver,
1447 Register mdp,
1448 Register reg2,
1449 bool receiver_can_be_null) {
1450 if (ProfileInterpreter) {
1451 Label profile_continue;
1452
1453 // If no method data exists, go to profile_continue.
1454 test_method_data_pointer(mdp, profile_continue);
1455
1456 Label skip_receiver_profile;
1457 if (receiver_can_be_null) {
1458 Label not_null;
1459 testptr(receiver, receiver);
1460 jccb(Assembler::notZero, not_null);
1461 // We are making a call. Increment the count for null receiver.
1462 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1463 jmp(skip_receiver_profile);
1464 bind(not_null);
1465 }
1466
1467 // Record the receiver type.
1468 record_klass_in_profile(receiver, mdp, reg2, true);
1469 bind(skip_receiver_profile);
1470
1471 // The method data pointer needs to be updated to reflect the new target.
1472 update_mdp_by_constant(mdp, in_bytes(VirtualCallData::virtual_call_data_size()));
1473 bind(profile_continue);
1474 }
1475 }
1476
1477 // This routine creates a state machine for updating the multi-row
1478 // type profile at a virtual call site (or other type-sensitive bytecode).
1479 // The machine visits each row (of receiver/count) until the receiver type
1480 // is found, or until it runs out of rows. At the same time, it remembers
1481 // the location of the first empty row. (An empty row records null for its
1482 // receiver, and can be allocated for a newly-observed receiver type.)
1483 // Because there are two degrees of freedom in the state, a simple linear
1484 // search will not work; it must be a decision tree. Hence this helper
1485 // function is recursive, to generate the required tree structured code.
1486 // It's the interpreter, so we are trading off code space for speed.
1487 // See below for example code.
1488 void InterpreterMacroAssembler::record_klass_in_profile_helper(
1489 Register receiver, Register mdp,
1490 Register reg2, int start_row,
1491 Label& done, bool is_virtual_call) {
1492 if (TypeProfileWidth == 0) {
1493 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1494 } else {
1495 record_item_in_profile_helper(receiver, mdp, reg2, 0, done, TypeProfileWidth,
1496 &VirtualCallData::receiver_offset, &VirtualCallData::receiver_count_offset);
1497 }
1498 }
1499
1500 void InterpreterMacroAssembler::record_item_in_profile_helper(Register item, Register mdp, Register reg2, int start_row,
1501 Label& done, int total_rows,
1502 OffsetFunction item_offset_fn,
1503 OffsetFunction item_count_offset_fn) {
1504 int last_row = total_rows - 1;
1505 assert(start_row <= last_row, "must be work left to do");
1506 // Test this row for both the item and for null.
1507 // Take any of three different outcomes:
1508 // 1. found item => increment count and goto done
1509 // 2. found null => keep looking for case 1, maybe allocate this cell
1510 // 3. found something else => keep looking for cases 1 and 2
1511 // Case 3 is handled by a recursive call.
1512 for (int row = start_row; row <= last_row; row++) {
1513 Label next_test;
1514 bool test_for_null_also = (row == start_row);
1515
1516 // See if the item is item[n].
1517 int item_offset = in_bytes(item_offset_fn(row));
1518 test_mdp_data_at(mdp, item_offset, item,
1519 (test_for_null_also ? reg2 : noreg),
1520 next_test);
1521 // (Reg2 now contains the item from the CallData.)
1522
1523 // The item is item[n]. Increment count[n].
1524 int count_offset = in_bytes(item_count_offset_fn(row));
1525 increment_mdp_data_at(mdp, count_offset);
1526 jmp(done);
1527 bind(next_test);
1528
1529 if (test_for_null_also) {
1530 // Failed the equality check on item[n]... Test for null.
1531 testptr(reg2, reg2);
1532 if (start_row == last_row) {
1533 // The only thing left to do is handle the null case.
1534 Label found_null;
1535 jccb(Assembler::zero, found_null);
1536 // Item did not match any saved item and there is no empty row for it.
1537 // Increment total counter to indicate polymorphic case.
1538 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1539 jmp(done);
1540 bind(found_null);
1541 break;
1542 }
1543 Label found_null;
1544 // Since null is rare, make it be the branch-taken case.
1545 jcc(Assembler::zero, found_null);
1546
1547 // Put all the "Case 3" tests here.
1548 record_item_in_profile_helper(item, mdp, reg2, start_row + 1, done, total_rows,
1549 item_offset_fn, item_count_offset_fn);
1550
1551 // Found a null. Keep searching for a matching item,
1552 // but remember that this is an empty (unused) slot.
1553 bind(found_null);
1554 }
1555 }
1556
1557 // In the fall-through case, we found no matching item, but we
1558 // observed the item[start_row] is null.
1559
1560 // Fill in the item field and increment the count.
1561 int item_offset = in_bytes(item_offset_fn(start_row));
1562 set_mdp_data_at(mdp, item_offset, item);
1563 int count_offset = in_bytes(item_count_offset_fn(start_row));
1564 movl(reg2, DataLayout::counter_increment);
1565 set_mdp_data_at(mdp, count_offset, reg2);
1566 if (start_row > 0) {
1567 jmp(done);
1568 }
1569 }
1570
1571 // Example state machine code for three profile rows:
1572 // // main copy of decision tree, rooted at row[1]
1573 // if (row[0].rec == rec) { row[0].incr(); goto done; }
1574 // if (row[0].rec != nullptr) {
1575 // // inner copy of decision tree, rooted at row[1]
1576 // if (row[1].rec == rec) { row[1].incr(); goto done; }
1577 // if (row[1].rec != nullptr) {
1578 // // degenerate decision tree, rooted at row[2]
1579 // if (row[2].rec == rec) { row[2].incr(); goto done; }
1580 // if (row[2].rec != nullptr) { count.incr(); goto done; } // overflow
1581 // row[2].init(rec); goto done;
1582 // } else {
1583 // // remember row[1] is empty
1584 // if (row[2].rec == rec) { row[2].incr(); goto done; }
1585 // row[1].init(rec); goto done;
1586 // }
1587 // } else {
1588 // // remember row[0] is empty
1589 // if (row[1].rec == rec) { row[1].incr(); goto done; }
1590 // if (row[2].rec == rec) { row[2].incr(); goto done; }
1591 // row[0].init(rec); goto done;
1592 // }
1593 // done:
1594
1595 void InterpreterMacroAssembler::record_klass_in_profile(Register receiver,
1596 Register mdp, Register reg2,
1597 bool is_virtual_call) {
1598 assert(ProfileInterpreter, "must be profiling");
1599 Label done;
1600
1601 record_klass_in_profile_helper(receiver, mdp, reg2, 0, done, is_virtual_call);
1602
1603 bind (done);
1604 }
1605
1606 void InterpreterMacroAssembler::profile_ret(Register return_bci,
1607 Register mdp) {
1608 if (ProfileInterpreter) {
1609 Label profile_continue;
1610 uint row;
1611
1612 // If no method data exists, go to profile_continue.
1613 test_method_data_pointer(mdp, profile_continue);
1614
1615 // Update the total ret count.
1616 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1617
1618 for (row = 0; row < RetData::row_limit(); row++) {
1619 Label next_test;
1620
1621 // See if return_bci is equal to bci[n]:
1622 test_mdp_data_at(mdp,
1623 in_bytes(RetData::bci_offset(row)),
1624 return_bci, noreg,
1625 next_test);
1626
1627 // return_bci is equal to bci[n]. Increment the count.
1628 increment_mdp_data_at(mdp, in_bytes(RetData::bci_count_offset(row)));
1629
1630 // The method data pointer needs to be updated to reflect the new target.
1631 update_mdp_by_offset(mdp,
1632 in_bytes(RetData::bci_displacement_offset(row)));
1633 jmp(profile_continue);
1634 bind(next_test);
1635 }
1636
1637 update_mdp_for_ret(return_bci);
1638
1639 bind(profile_continue);
1640 }
1641 }
1642
1643
1644 void InterpreterMacroAssembler::profile_null_seen(Register mdp) {
1645 if (ProfileInterpreter) {
1646 Label profile_continue;
1647
1648 // If no method data exists, go to profile_continue.
1649 test_method_data_pointer(mdp, profile_continue);
1650
1651 set_mdp_flag_at(mdp, BitData::null_seen_byte_constant());
1652
1653 // The method data pointer needs to be updated.
1654 int mdp_delta = in_bytes(BitData::bit_data_size());
1655 if (TypeProfileCasts) {
1656 mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size());
1657 }
1658 update_mdp_by_constant(mdp, mdp_delta);
1659
1660 bind(profile_continue);
1661 }
1662 }
1663
1664
1665 void InterpreterMacroAssembler::profile_typecheck(Register mdp, Register klass, Register reg2) {
1666 if (ProfileInterpreter) {
1667 Label profile_continue;
1668
1669 // If no method data exists, go to profile_continue.
1670 test_method_data_pointer(mdp, profile_continue);
1671
1672 // The method data pointer needs to be updated.
1673 int mdp_delta = in_bytes(BitData::bit_data_size());
1674 if (TypeProfileCasts) {
1675 mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size());
1676
1677 // Record the object type.
1678 record_klass_in_profile(klass, mdp, reg2, false);
1679 }
1680 update_mdp_by_constant(mdp, mdp_delta);
1681
1682 bind(profile_continue);
1683 }
1684 }
1685
1686
1687 void InterpreterMacroAssembler::profile_switch_default(Register mdp) {
1688 if (ProfileInterpreter) {
1689 Label profile_continue;
1690
1691 // If no method data exists, go to profile_continue.
1692 test_method_data_pointer(mdp, profile_continue);
1693
1694 // Update the default case count
1695 increment_mdp_data_at(mdp,
1696 in_bytes(MultiBranchData::default_count_offset()));
1697
1698 // The method data pointer needs to be updated.
1699 update_mdp_by_offset(mdp,
1700 in_bytes(MultiBranchData::
1701 default_displacement_offset()));
1702
1703 bind(profile_continue);
1704 }
1705 }
1706
1707
1708 void InterpreterMacroAssembler::profile_switch_case(Register index,
1709 Register mdp,
1710 Register reg2) {
1711 if (ProfileInterpreter) {
1712 Label profile_continue;
1713
1714 // If no method data exists, go to profile_continue.
1715 test_method_data_pointer(mdp, profile_continue);
1716
1717 // Build the base (index * per_case_size_in_bytes()) +
1718 // case_array_offset_in_bytes()
1719 movl(reg2, in_bytes(MultiBranchData::per_case_size()));
1720 imulptr(index, reg2); // XXX l ?
1721 addptr(index, in_bytes(MultiBranchData::case_array_offset())); // XXX l ?
1722
1723 // Update the case count
1724 increment_mdp_data_at(mdp,
1725 index,
1726 in_bytes(MultiBranchData::relative_count_offset()));
1727
1728 // The method data pointer needs to be updated.
1729 update_mdp_by_offset(mdp,
1730 index,
1731 in_bytes(MultiBranchData::
1732 relative_displacement_offset()));
1733
1734 bind(profile_continue);
1735 }
1736 }
1737
1738
1739
1740 void InterpreterMacroAssembler::_interp_verify_oop(Register reg, TosState state, const char* file, int line) {
1741 if (state == atos) {
1742 MacroAssembler::_verify_oop_checked(reg, "broken oop", file, line);
1743 }
1744 }
1745
1746
1747 // Jump if ((*counter_addr += increment) & mask) == 0
1748 void InterpreterMacroAssembler::increment_mask_and_jump(Address counter_addr, Address mask,
1749 Register scratch, Label* where) {
1750 // This update is actually not atomic and can lose a number of updates
1751 // under heavy contention, but the alternative of using the (contended)
1752 // atomic update here penalizes profiling paths too much.
1753 movl(scratch, counter_addr);
1754 incrementl(scratch, InvocationCounter::count_increment);
1755 movl(counter_addr, scratch);
1756 andl(scratch, mask);
1757 if (where != nullptr) {
1758 jcc(Assembler::zero, *where);
1759 }
1760 }
1761
1762 void InterpreterMacroAssembler::notify_method_entry() {
1763 // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to
1764 // track stack depth. If it is possible to enter interp_only_mode we add
1765 // the code to check if the event should be sent.
1766 Register rthread = r15_thread;
1767 Register rarg = c_rarg1;
1768 if (JvmtiExport::can_post_interpreter_events()) {
1769 Label L;
1770 movl(rdx, Address(rthread, JavaThread::interp_only_mode_offset()));
1771 testl(rdx, rdx);
1772 jcc(Assembler::zero, L);
1773 call_VM(noreg, CAST_FROM_FN_PTR(address,
1774 InterpreterRuntime::post_method_entry));
1775 bind(L);
1776 }
1777
1778 if (DTraceMethodProbes) {
1779 get_method(rarg);
1780 call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry),
1781 rthread, rarg);
1782 }
1783
1784 // RedefineClasses() tracing support for obsolete method entry
1785 if (log_is_enabled(Trace, redefine, class, obsolete)) {
1786 get_method(rarg);
1787 call_VM_leaf(
1788 CAST_FROM_FN_PTR(address, SharedRuntime::rc_trace_method_entry),
1789 rthread, rarg);
1790 }
1791 }
1792
1793
1794 void InterpreterMacroAssembler::notify_method_exit(
1795 TosState state, NotifyMethodExitMode mode) {
1796 // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to
1797 // track stack depth. If it is possible to enter interp_only_mode we add
1798 // the code to check if the event should be sent.
1799 Register rthread = r15_thread;
1800 Register rarg = c_rarg1;
1801 if (mode == NotifyJVMTI && JvmtiExport::can_post_interpreter_events()) {
1802 Label L;
1803 // Note: frame::interpreter_frame_result has a dependency on how the
1804 // method result is saved across the call to post_method_exit. If this
1805 // is changed then the interpreter_frame_result implementation will
1806 // need to be updated too.
1807
1808 // template interpreter will leave the result on the top of the stack.
1809 push(state);
1810 movl(rdx, Address(rthread, JavaThread::interp_only_mode_offset()));
1811 testl(rdx, rdx);
1812 jcc(Assembler::zero, L);
1813 call_VM(noreg,
1814 CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_exit));
1815 bind(L);
1816 pop(state);
1817 }
1818
1819 if (DTraceMethodProbes) {
1820 push(state);
1821 get_method(rarg);
1822 call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit),
1823 rthread, rarg);
1824 pop(state);
1825 }
1826 }
1827
1828 void InterpreterMacroAssembler::load_resolved_indy_entry(Register cache, Register index) {
1829 // Get index out of bytecode pointer
1830 get_cache_index_at_bcp(index, 1, sizeof(u4));
1831 // Get address of invokedynamic array
1832 movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize));
1833 movptr(cache, Address(cache, in_bytes(ConstantPoolCache::invokedynamic_entries_offset())));
1834 if (is_power_of_2(sizeof(ResolvedIndyEntry))) {
1835 shll(index, log2i_exact(sizeof(ResolvedIndyEntry))); // Scale index by power of 2
1836 } else {
1837 imull(index, index, sizeof(ResolvedIndyEntry)); // Scale the index to be the entry index * sizeof(ResolvedIndyEntry)
1838 }
1839 lea(cache, Address(cache, index, Address::times_1, Array<ResolvedIndyEntry>::base_offset_in_bytes()));
1840 }
1841
1842 void InterpreterMacroAssembler::load_field_entry(Register cache, Register index, int bcp_offset) {
1843 // Get index out of bytecode pointer
1844 movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize));
1845 get_cache_index_at_bcp(index, bcp_offset, sizeof(u2));
1846
1847 movptr(cache, Address(cache, ConstantPoolCache::field_entries_offset()));
1848 // Take shortcut if the size is a power of 2
1849 if (is_power_of_2(sizeof(ResolvedFieldEntry))) {
1850 shll(index, log2i_exact(sizeof(ResolvedFieldEntry))); // Scale index by power of 2
1851 } else {
1852 imull(index, index, sizeof(ResolvedFieldEntry)); // Scale the index to be the entry index * sizeof(ResolvedFieldEntry)
1853 }
1854 lea(cache, Address(cache, index, Address::times_1, Array<ResolvedFieldEntry>::base_offset_in_bytes()));
1855 }
1856
1857 void InterpreterMacroAssembler::load_method_entry(Register cache, Register index, int bcp_offset) {
1858 // Get index out of bytecode pointer
1859 movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize));
1860 get_cache_index_at_bcp(index, bcp_offset, sizeof(u2));
1861
1862 movptr(cache, Address(cache, ConstantPoolCache::method_entries_offset()));
1863 imull(index, index, sizeof(ResolvedMethodEntry)); // Scale the index to be the entry index * sizeof(ResolvedMethodEntry)
1864 lea(cache, Address(cache, index, Address::times_1, Array<ResolvedMethodEntry>::base_offset_in_bytes()));
1865 }